HYDRAULIC CONTROLS
We offer easy-to-apply, environmentally ruggedized electronic controllers.
Our controllers have the capability to be user adjustable locally or pre-programmed to suit virtually any application requiring an electro-hydraulic solution and are universally compatible with all major hydraulic OEM proportional products.
The UControl MC2-18-6 mobile machine controller brings powerful hydraulic control and extensive flexible I/O to rugged applications.
The MC2-18-6 is ready for high-performance fluid power control and 18 total inputs and 6 total outputs.
Built to perform in high heat and high vibration areas, UControl mobile controllers deliver extreme durability with precision control.
Featuring multiple CAN interfaces, open/short circuit protection, flexible universal inputs and software selectable outputs, UControl mobile controllers are ready and scalable for a variety of equipment needs and applications.
UControl mobile controllers are programmable with ACE, an intuitive new development environment from Enovation Controls, or CODESYS
I/O Summary
- Inputs (18):
- Universal Analog / High Frequency: 4
- Universal Analog: 14
- Outputs (6) [Software Selectable]:
- 4A PWM (feedback): 2
- Dual Range PWM 4A / 0.5 A (feedback): 4
- 15A PWM (feedback): 0
Hardware
CAN 2.0B / J1939: 2 Channels
Sensor Supply: (1) 400mA max @ 5 or 10 VDC [Software Selectable Voltage]
Connectors:
- J1 (18 pin – E key) – DT16-18SE-K004
- J2 (18 pin – A key) – DT16-18SA-K004
LED Indicators:
- (1) Green – Power Status
- (1) White – Software Configurable
- (1) Blue – Software Configurable
Power Supply
- Nominal Supply Voltage: 6-32 VDC, Nominal Operation @ 12 /24 VDC
- Peak Voltage During Load Dump: Power supply suppression limits voltage to 55 Volts for duration of Load Dump Event (2 ohm supply)
- Maximum Continuous Current: 24 A
- Idle Current 12/24 VDC:
- < 200mA @ 12VDC
- < 100mA @ 24VDC
- Standby Current 12/24 VDC:
- < 5mA @12VDC
- < 2.5mA @ 24VDC
- Node/Sleep Pin: Control sleep and wake settings
Physical & Environmental
- Operating Temperature Range: -40 °C to +105 °C (May be limited to +85°C at full rated current)
- Storage Temperature Range: -40 °C to +125 °C
- Operating Altitude: 0-4000 m
- IP Rating: IP67 (IP69K with harness-side rated boots)
- Vibration: 5.82 Grms, 8 hours per axis
- Shock: ±50G, 6ms
- Housing: Cast aluminum housing, soft-gel potted for extreme ruggedness and durability
- EMC: 2014/30/EU (CE / E-MARK), CISPR 11, CISPR 25, EN 60945, EN 61000-4-2, EN 61326-1, SAE J1113-2, SAE J1113-4, SAE J1113-11, SAE J1113-12, SAE J1113-13, SAE J1113-21, SAE J1113-22, SAE J1113-26, SAE J1455
- Dimensions: 145 mm x 140 mm x 60 mm
- Weight: Less than 5 pounds
