PENNY & GILES
Fingertip Joystick Controller
Product Family: JC120
Developed for applications where
ergonomics and system integrity are paramount, the JC120 is a minimum width,
low profile joystick controller that provides smooth, precise fingertip control
in one axis with a choice of two lever lengths.
The JC120 is sealed
to IP66 to enable it to operate in extreme environments. Standing only 54
or 64mm high, the JC120 is less susceptible to unintentional operation. With
all of the components contained within the handle, it is ideal for mounting in
low profile panels and arm rests.
Installation time has been reduced through the use of a standard 7-pin
Molex electronic connector, and the joystick has been designed for
maintenance-free operation throughout on operating life of greater than five
An optional neoprene boot is available for the short handle version,
allowing operation in environments where aggressive materials are present,
protecting from dust and dirt ingress.
New friction hold versions have been introduced, which allow the lever to
be set to a specific position for applications such as setting speed controls.
Typical applications include remote control chest packs and the control of
construction, agricultural or material handling equipment.
Width only 26.5mm
Low profile ergonomic design
Choice of lever heights
Center or End return spring mechanism - with or without mechanical
Friction hold version - with or without mechanical detents
Sealed to IP67 with optional neoprene boot for aggressive particle
Choice of track resistance values and output ranges
Standard Molex automotive connector